Tree Rings: The Easiest Yard Upgrade You'll Do Before the Wet

Tree Rings: The Easiest Yard Upgrade You'll Do Before the Wet

There's a tree in most Mackay backyards with a scruffy patch of half-dead grass around its base, a few nicks in the bark from the whipper snipper, and a sad scatter of mulch that washed away two wet seasons ago. If that sounds familiar, good news: it's one of the quickest fixes in the whole yard.

A tree ring is exactly what it sounds like. A circle of edging around the base of a tree, filled with mulch. It takes an afternoon, it looks sharp from day one, and done properly in October, it sets your trees up to ride out the wet season in much better shape.

Why your trees want a ring

It keeps the whipper snipper away from the trunk. Line trimmers and mower decks are the number one enemy of backyard trees. A strike to the base strips bark and damages the living layer just underneath, which is what carries water and nutrients up the tree. Do that enough times and a perfectly healthy tree starts to struggle. A ring gives you a hard line to trim up to, and nothing to trim inside it.

It stops the lawn stealing the good stuff. Grass is greedy. Its roots sit in the same top layer of soil as your tree's feeder roots, and it competes for every drop of water and every bit of fertiliser. Clear the grass from a ring around the trunk and your tree gets first dibs.

It holds the mulch in place. This is the big one in North Queensland. Mulch does a lot of heavy lifting around a tree: it keeps roots cool through a 34 degree afternoon, slows evaporation, feeds the soil as it breaks down, and softens the impact of tropical downpours on bare ground. If you want the full rundown, our post on the real benefits of wood chips covers it. But mulch with nothing holding it in has a habit of ending up on the lawn after the first big storm. A ring keeps it where it's doing its job.

It just looks good. A crisp circle of steel with fresh mulch inside instantly makes a yard look looked after. It's the landscaping equivalent of a fresh haircut.

Why steel rings beat the alternatives

You can make a tree ring out of a lot of things. Bricks, pavers, timber edging, plastic edging, or just a spade-cut edge. They all work for a while. Here's why we keep coming back to steel.

A spade-cut edge needs recutting every few weeks once the grass gets going in the warmer months. Timber rots in our humidity. Plastic goes brittle in the sun and lifts. Loose bricks and pavers get bumped, sink unevenly, and give grass a gap to creep through.

Shapescaper steel tree rings are made in Australia from 2mm BlueScope steel, come pre-rolled into a true circle, and have a rounded top rim that adds strength and is much kinder on shins. They're tough enough to trim right up against without damage. The Redcor finish weathers to a warm, rusty patina that suits mulch beautifully, much like corten steel.

The clever bit for existing trees: rings come either closed (fully riveted and ready to drop in) or open, so you can wrap them around a trunk that's already there and close them with the supplied rivets. No need to thread a ring over the top of a tree. We've tried. It doesn't go well.

If you're edging straight garden beds as well as trees, our guide to garden edging that survives a North Queensland wet season covers the rest of the yard.

Picking the right size ring

Two measurements matter: the diameter (how wide) and the height (how tall the steel is).

Diameter: go bigger than you think. A tree's feeder roots spread well past the trunk, so a wider ring protects more of the root zone. As a rule of thumb, pick the biggest ring that suits the space, and keep at least 25cm of clear mulch between the trunk and the steel on every side.

Here's how the Redcor ring sizes we stock line up, and roughly how much mulch each one takes at a 75mm layer:

Ring diameter

Good for

Mulch at 75mm deep

575mm

Newly planted trees, palms, feature shrubs

About 20 litres (half a 50L bag)

765mm

Young fruit trees and small ornamentals

About 35 litres (one 50L bag)

1150mm

Citrus, frangipani and established small trees

About 80 litres (two 50L bags)

1530mm

Bigger shade trees and statement plantings

About 140 litres (three 50L bags)

Doing a row of trees along the fence? A small bulk load starts to make more sense than bags. Our cubic metre calculator does the maths, or bring your measurements into the yard and we'll work it out with you.

Height: low for established trees, taller for new plantings. This is where people go wrong, so it's worth slowing down. Around an established tree, the ring is there to hold mulch, not soil. Pick a lower profile (100mm to 185mm) that sits just proud of the lawn, and fill it with mulch only.

Never use a tall ring to build up a mound of soil around an existing trunk. Burying the base of a tree traps moisture against the bark and starves the roots underneath of air. In a Mackay wet season, that's a recipe for rot.

The taller rings (230mm and up) come into their own when you're planting something new and want a raised bed to plant into, or for a feature bed of shrubs and ground covers.

Which mulch to use in a tree ring

The short answer: something chunky enough to stay put in a downpour. Our ultimate guide to choosing the best garden mulch goes through every option in detail, but for tree rings, these are the standouts from our mulch range:

  • Hardwood chip. Our pick for most tree rings. Heavy, long-lasting and much less likely to float off in a storm.
  • Forest mulch and woodchip blend. Great value if you're doing several trees at once, and they break down into good organic matter over time.
  • Red or black mulch. For when the ring is a feature. Red mulch next to weathered Redcor steel is a seriously good-looking combination.
  • Pine bark. Neat and slow to break down, but the lighter grades can float in heavy rain, so it's best where the ring sits well above the mulch line.
  • Sugar cane mulch. Lovely for fruit trees, but it breaks down fast in our heat, so plan on topping it up more often.

How to install a tree ring (in one afternoon)

  1. Mark your circle. Sit the ring on the lawn, centred on the trunk, and run a spade around the outside to mark it.
  2. Remove the grass inside. Slice the turf off with a flat spade and lift it out. Stay shallow, just the turf layer. Around an established tree, don't dig deeper than you need to. Those roots are close to the surface.
  3. Open and position the ring. For an existing tree, open the ring, wrap it around the trunk, and close it with the supplied rivets.
  4. Set the height. Push or tap the ring into the soil so the top rim sits a few centimetres above the lawn. That gives you a clean line to trim against and a lip to hold the mulch in.
  5. Backfill the outside. Firm the soil back against the outside of the steel so the lawn grows right up to it.
  6. Add your mulch. Spread it about 75mm deep inside the ring, then pull it back from the trunk so there's a gap about a hand-width wide. No mulch volcanoes. Mulch piled against the bark holds moisture right where you don't want it.
  7. Water it in. A good soak settles the mulch and gives the roots a drink.

Why October is the month to do it

The wet season is the real deadline in Mackay. Do your tree rings now and the mulch is bedded in, the soil underneath is protected, and your trees go into the first big storms with cool, covered roots instead of bare, compacted ground. Plus, you'll be digging in October weather rather than January humidity. Your future self will thank you.

Come March, give each ring a quick top-up to replace whatever broke down over the wet, and you're set for another year.

Not just for trees

Once you've done one, you'll start seeing spots for rings everywhere. They make great feature beds for a single statement plant, a neat surround for a birdbath or sculpture, or a raised herb garden near the back door. If you want to go all out, the Redcor Triple Rings stack into a three-tier planter that's basically an instant kitchen garden.

See them in the yard

Shapescaper tree rings are much easier to choose when you can see the sizes side by side. Swing past the yard at 839 Mackay Bucasia Road, Bucasia, with a rough measurement of your trunk and the space around it. We'll help you pick the right ring, the right mulch, and the right amount of it.

Shop Shapescaper tree rings and edging

Back to blog